BlueMusic 2.0

[admin]

Teksoft is opening a new website, www.teksoftbluemusic.com together with its release of version 2.0 of the succesful BlueMusic product! Using Bluemusic, you can connect your Bluetooth headset and enjoy listening to your favourite MP3's, Podcasts or Audio Books directly from your Pocket PC without using any cables! Or you can use Skype for Pocket PC with your phone Bluetooth headset. Bluemusic makes everything so convenient for you!



-in the trial version, the bluetooth playback is stopped after 2minutes (by user requests)
-phone integration (resume-audio after a call automatically)
-many other features, please see www.teksoftbluemusic.com

Mr. A.

[seatec]

Are there upgrades for recent purchases? Purchased on 2/2/07?

[brandonlee11]

I am using a Treo 700W with the Plantronics Discovery 655 headset. I also have Voice Command 1.6 installed as well. I just installed Bluemusic 2.0 but no sound comes out of the headset. I will also try it with MS Voice Command 1.5 instead of 1.6.

If anyone has any success with the Treo 700W, let me know. Thanks.

brandonlee11(at)hotmail.com.

(antispam: (at) becomes @ when contacting me, thanks)

[UKenGB]

Are there upgrades for recent purchases? Purchased on 2/2/07?

Likewise, having only just bought BM, surely I'm not expected to have to pay all over again? After the all the recommendations I've made:-(

[admin]

Are there upgrades for recent purchases? Purchased on 2/2/07?

Likewise, having only just bought BM, surely I'm not expected to have to pay all over again? After the all the recommendations I've made:-(

UKenGB, this is not the right place for this, better contact Teksoft Sales to discuss the issue. But IMHO 2.0 brings more features, so the development work must be justified somehow. I think that this was a good initiative from Teksoft to offer the Upgrade option (so its not paying "all over again" is just paying the difference to have the new features too)

More on this here:
http://www.teksoftbluemusic.com/index.p ... n=purchase

All the bests,
Mr. A.

[admin]

Are there upgrades for recent purchases? Purchased on 2/2/07?

Yes seatec, see the link in my previous post. Upgrade means paying 3.95EUR to have the 2.0 version. Its the same deal (pay 9.95eur for 2.0, or pay 6+3.95).

I'm getting into financial issues now, interesting

Mr. A.

[admin]

I am using a Treo 700W with the Plantronics Discovery 655 headset. I also have Voice Command 1.6 installed as well. I just installed Bluemusic 2.0 but no sound comes out of the headset. I will also try it with MS Voice Command 1.5 instead of 1.6.

If anyone has any success with the Treo 700W, let me know. Thanks.

brandonlee11(at)hotmail.com.

(antispam: (at) becomes @ when contacting me, thanks)

Brandon, I'm not sure if this helps, but Treo 700W is marked in red in the list of compatible devices...

[UKenGB]

Are there upgrades for recent purchases? Purchased on 2/2/07?

Likewise, having only just bought BM, surely I'm not expected to have to pay all over again? After the all the recommendations I've made:-(

... IMHO 2.0 brings more features, so the development work must be justified somehow. I think that this was a good initiative from Teksoft to offer the Upgrade option (so its not paying "all over again" is just paying the difference to have the new features too)

Ah, but I hadn't received the upgrade offer when I wrote that. The upgrade price is acceptable as I understand the need to fund the ongoing development. I was just worried that there was no upgrade price offered. All is well on that score now:-)

But, can we have CAB files to download? This makes it easier to install when trying to avoid the POS that is ActiveSync.

Also, should BM 1 be uninstalled first, or will it upgrade OK?

[admin]

UKenGB, I'm glad that things are turning out ok (for a moment I was worried for the messenger's life <- mine )

I played a bit with the new version, it went ok without uninstalling the previous, but I think its better if you remove it manually first.

Regarding the CAB files, I'll make sure that the involved persons will be notified about this.


Mr. A.

[pilotza]

Hi! I have not TodayPlugin on my E-ten m600... Something wrong ?

[pilotza]

Everything OK. Need to install to main memory

[brandonlee11]

The list must have been updated to reflect the Treo 700W in red. Hopefully others will have better luck with the Treo. I like my phone, but this is one functionality that I would relaly like to get working.[/quote]

[admin]

The list must have been updated to reflect the Treo 700W in red. Hopefully others will have better luck with the Treo. I like my phone, but this is one functionality that I would relaly like to get working.

[/quote]

I'm just curious: Is there any voice command software that runs on your Treo?

[UKenGB]

What's going on with the installer?

First of all, why change from other Teksoft apps, e.g. BM 1 and Smartbar that provide CAB files for those that need them? Now we're stuck with an exe file that we have to download first to the PPC and then run that. Well, I removed BM 1 first (without a hitch) and ran this exe installer and it said it was installing teksoft-cer-1.cab and that was that, nothing else. Since it also requires teksoft-cer-2.cab and the 'signed' CAB (judging by previous Teksoft apps) this was never going to work.

So, with multiple Teksoft apps, does it need multiple versions of teksoft-cer-1 & 2.cabs? Are these the same for each app, or are they different? If the latter, why make them as separate installable CABs? If these only need installing once for multiple apps, why is the installer trying to install again?

And then the final insult is that this new fangled installer - doesn't. Well, 1 out of 3 IS bad.

I need BM. I didn't expect the update from v1 to v2 would be such a mess. Should I just re-install BM1 until this gets sorted.

Very disappointed:-(

[admin]

UKenGB, we both know by now that waiting a little longer is better then jumping to conclusions but...

The installer is a step forward. Sorry to disagre with you. 3CAB files were too much for most of the users: they didn't know what to do with those.

If I give you a bunch of 10files, maybe you won't be able to use them, but hey, if I give you one single exe file, named click_me.exe or setup.exe you will do that (click) and have your app installed. I guess the idea is clear now.

Further more the new site (www.teksoftbluemusic.com) clearly presents a F.A.Q. section. Entry 1. shows exactly what you need to do in order to use the installer.
After teksoft-cer-1.cab is installed you need to press the OK button in the right corner, teksoft-cer-2.cab starts. Then press OK again and the last cab (bluemusic) installs itself. ... All is shown in the FAQ section. Yes the same 3 cab files as in previous, all put together in a nice, compact installer.

teksoft-cer-1.cab and teksoft-cer-2.cab are security certificates and yes they need to be there. Why? Ask Microsoft.

I need BM. I didn't expect the update from v1 to v2 would be such a mess. Should I just re-install BM1 until this gets sorted.

I don't get it. You are judging an entire app, from the problems you had with the installer? Sorry but you are wrong. Instead of seeing multiple improvments (most of them required by yourself and other users) and simply reading the manual or the FAQ section you get stuck at something very easy.

[admin]

Regarding the CAB files, I'll make sure that the involved persons will be notified about this.

http://www.teksoftbluemusic.com/index.p ... n=download

CAB files added

[stevewooding]

Hi Teksoft

I have an orange SPV M3100 and was really looking forward to v2 as I couldn't get v1.5 to work on my device. Unfortunately the problem is still there with v2 - no matter which installation route I follow - desktop, device or CAB files, it just doesn't work.

when I activate it I get the 'beep' in the headset and can hear a hiss in the earpiece but no sound from the Pocket PC is directed through it - it all still comes out of the device's speaker. No amount of resets, switching on and off etc. are curing the issue.

Your compatibility list has the M3100 on it in blue, so I assumed it'd all work wonderfully. It doesn't. How do I get it to work?

Steve.

[vampirex]

Hi All,
After buying BM V1.0.5 which didn’t work on my HTC TyTN, I just bought BlueMusic V2 two days ago and tried to install yesterday.
1) When I installed and I restarted the device I got a message “File CARTE cannot be open because it is not signed… or one of their components is not found. You have to reinstall or restore this file” and after forcing that and trying a lot of thing to start (I didn’t get the today plug-in working), BM V2 runs exactly as V1.0.510: no return after call or device wake up and variable working time, voice speed dial not working…
What is very strange is that I don’t have any file called “CARTE” on my TYTN but I have one on my desktop.
I uninstalled BM V2 but some disagreements staying on the TYTN I restored my device (SPB Backup which ran perfectly up to now) and when it has been done it was unable to sync with XP pro. I tried a lot of thing but nothing to do even my Bluetooth drivers has been corrupted. So I had to:
On the desktop: reinstall BT drivers and remake all links and partnerships, remove the MS ActiveSync V4.2, clean the registry and reinstall AS 4.2.
On the TYTN: hard reset, reinstall all software.
To be honest I don’t know what happened exactly, MS alone is able to make this kind of problem without the help of anybody else (grin), but the starting point is because BM doesn’t work correctly.

As I am obstinate, today I tried to reinstall just after Hard Reset and setting ActiveSync parameters. Each time I start my device I get the same message than yesterday, but with different file name: “File PROGRAM cannot be open because it is not signed…or one of their components is not found. You have to reinstall or restore this file” it could be the beginning of some directory name (?). I have to tap OK to continue.

After that:
-Running seems to be aleatory, if tap stop (red button) and after tap (green button) it doesn’t work, but after 30 sec or one minute it start back in the headset.
-Voice speed dial no longer works when launched from the headset.
-After waking up sometimes it restarts automatically and sometimes it doesn’t.
-After making a call I got the sound in the headset for few seconds and it switches to the phone speaker, so it means that the original “handsfree” function no longer works. When the call is finished the sound doesn’t resume to headset although the blue light is on. It is not possible to get back the sound in the headset up to next soft reset or power off.
BR.

PS: Just a remark, I couldn't make these tests with the demo version as some actions are longer that two minutes.

[radhoo]

Hi all, thanks for all your comments.

UKenGB, you've posted several ideas, sorry I didn't have the time to respond to each of them, be assured that we will try to improve, and take them into account in the future.
You said something about and installation issue. Did you manage to use the CAB files added to teksoftbluemusic.com recently to solve that problem?

stevewooding, your device is the HTC Tytn, customized by Orange. Some of you might remember all the limitations Orange used to do in the past by providing Software-Locked devices. Well they are not my favorite brand because of this.
Anyhow, working with Orange ROMs is tricky, but your device remains the same HTC Tytn. And the his issue happens on devices that don't get the HTC Tytn Fix, well known in the BlueMusic 1.5.
That patch is applied automatically now, but I'd like to know if that worked as expected on your device.
Use File Explorer and browse to the Windows Folder on your device. Find Bluemusic-install.log and attach it to this thread so I can have a look.

vampirex I would be at least as angry as you were after so many issues and problems.

Now I guess you know BlueMusic can't possibly cause the disaster you've descriebed since its just a pocket pc application not related in any way to your desktop. So even if I appreciate your long detailed description, It would have been better to stick to the relevant facts.

Regarding the error message "File CARTE cannot be open because it is not signed… or one of their components is not found. You have to reinstall or restore this file" I'll need to run some tests, then I'll be able to comment on it.

[Johny]

Hi All,
On the desktop: reinstall BT drivers and remake all links and partnerships, remove the MS ActiveSync V4.2, clean the registry and reinstall AS 4.2.
On the TYTN: hard reset, reinstall all software.
To be honest I don’t know what happened exactly, MS alone is able to make this kind of problem without the help of anybody else (grin), but the starting point is because BM doesn’t work correctly.

waw, vampirex, man, good thing BM wasn't the starting point of a car accident or something

Cheer up,
Johny B

[vampirex]

@johny: Very easy answer, as I stated to be honest "I am not sure.." but I am in trouble.
@radhoo: Did you test with a HTC TyTN or any Hermes 200 device ? You can contest for the first install, because nothing is sure and I cannot be sure about the source of the problem and, one more time, I want to be honest. I just explain what I saw.
I have to tell that I use a very basic hack which doesn't have the goal to be as sophisticated as BM (on advertise) but at least it works well on my device as well as for other guys I chat on other forums.

[UKenGB]

The installer is a step forward. Sorry to disagre with you. 3CAB files were too much for most of the users: they didn't know what to do with those.

If I give you a bunch of 10files, maybe you won't be able to use them, but hey, if I give you one single exe file, named click_me.exe or setup.exe you will do that (click) and have your app installed. I guess the idea is clear now.

It was clear that this was another effort at 'dumbing down', but that badly affects other users. I install from my Mac and for that, CAB files are the perfect solution, better than using the Wintel as that installs everything to the local PC first - how DUMB is that.

Further more the new site (www.teksoftbluemusic.com) clearly presents a F.A.Q. section. Entry 1. shows exactly what you need to do in order to use the installer.
After teksoft-cer-1.cab is installed you need to press the OK button in the right corner, teksoft-cer-2.cab starts. Then press OK again and the last cab (bluemusic) installs itself. ... All is shown in the FAQ section.

Ah, I see the problem. I had previously installed Smartbar and that RE-ASSIGNS the OK/X button in the top right so that it closes the running app and that halts the installer at that point, so you only get the first file installed. Now, who wrote Smartbar and who would have expected that to be installed and able to screw up this new installer....? What, both written by the same people? Really?
Leaving aside any other smartarse remarks, it's not great when a developer writes something new that trips up on their own other products.

Yes the same 3 cab files as in previous, all put together in a nice, compact installer.
teksoft-cer-1.cab and teksoft-cer-2.cab are security certificates and yes they need to be there. Why? Ask Microsoft.

I don't really care why they are needed - no-one else seems to require them, but if they are are the same and ALREADY installed by another of your apps, why install them again?

I don't get it. You are judging an entire app, from the problems you had with the installer? Sorry but you are wrong. Instead of seeing multiple improvments (most of them required by yourself and other users) and simply reading the manual or the FAQ section you get stuck at something very easy.

I was/am NOT judging the app, just the installer. BlueMusic is great and I really need it now, I was looking forward to trying out the additional functionality in the new version - still am. No, it's the installer I am complaining about. I loved the fact that when purchasing your products there was the choice of PC installer or the CAB files - great. Read the install text to find out which ones to install and bingo, everything goes without a hitch. But,this new installer cannot be used in such a simple manner and immediately fails because of another of YOUR products. Sorry, but this is definitely a retrograde step. When I finally get BM 2 installed I have no doubt i will be delighted, not so with its installer however.

[radhoo]

UKenGB,

Now I understand why you said you got stuck after the first cab.

Smartbar brings more options, that some users need, yes there are users happy with the OK the Minimize and the Close (you also have them on the Desktop PC).
(eg. you need Real-Close button? OK, but try not to kill the installer with it)

A misuse of these options can indeed terminate your installation prematurelly, but this is true for other cases also: you can reset the device while installing and the result is the same, installation aborted.

But You are not reseting the device while installing, are you?. Why? Because you know what reset does.
Ok. So I guess If you knew what each button is doing, everything would have been ok. Don't get me wrong, this is not a reproach, I'm sure your comments will make Smartbar better in the future, and I also understand the combination of events that caused you trouble, its all clear, but still,

the problems you had were caused by a misuse of the software. Why? Because used correctly, the installer works perfectly, doesn't it?

Cheers,
Radu

[UKenGB]

the problems you had were caused by a misuse of the software. Why? Because used correctly, the installer works perfectly, doesn't it?

No it does not. Again, it was NOT misuse as I WAS using it correctly.

I still have no answer as to why it installs the security files when:-

- No other software does this.

- Why install them again if your other products have already installed them? Can you simply skip these?

- Does the De-install routine remove them?

I have to say again that I am NOT complaining about the software products themselves - BlueMusic is great and I think SmartBar has potential (although not for me at the moment). It is just annoying when a developer tries to fix something that ain't broke. The install options were fine and now they ARE broken. Tell you what. Solve the problem by making available the PC installer, the PPC installer AND the CAB files for those that want/need them. No big deal for you as you have all the relevant pieces. Always give the customer the choice and don't try to railroad them into doing things YOUR way. it's what I (and quite a few others) hate about Microsoft. Please don't go there.

[admin]

UKenGB, we are trying to USE your suggestions, please allow us to do this in a civilized way.

You've made a mistake pressing Close while installing, see why here:
http://teksoftco.com/forum/viewtopic.php?t=200&start=37 were one of the developers explains this misuse.

The CAB files were added yesterday, so feel free to use those if they are better for your purposes (see download section on www.teksoftbluemusic.com).

Please keep to the topic, this thread is not about installers, its about BM 2.0

Thank you.

[radhoo]

I still have no answer as to why it installs the security files when:-

- No other software does this.

- Why install them again if your other products have already installed them? Can you simply skip these?

- Does the De-install routine remove them?

Ok now for the LAST part:

The security files (certificates) are 2 cabs that need to be installed so our application can prove to the system that it comes from a trusted source. (else Bluemusic could contain Viruses or HotLine dialers, couldn't it?)

No other software does this, because most of the companies don't bother about the certificates, and because they are quite expensive.

No Deinstall is required. Certificates can be checked by the user by going to Start->Settings->System->Certificates. They are ~800bytes long (like a grain of sand on an earth-sized beach)

If others need to know too, read more about certificates here: http://msdn2.microsoft.com/en-us/library/ms926458.aspx
Privileged API (code that works only if the application is signed) goes here:
http://msdn.microsoft.com/library/defau ... edAPIs.asp

[dvmrp]

I'm trying 2.0. It could not be installed using the .exe file. I'd to load the three CABs manually into the phone and installed them one by one from there. It's working as described. However, I run into a issue that when I turn it off, the 'BM' screen changes to the 'off-line' logo but exists all of a sudden. Then, something similar to the system dialer comes up from nowhere but without the call list. I can push the home button to back to the main screen. However, when I push the phone button but the call list still cannot be displayed. I push the phone button again and find that it dials a number, so it seems that the list is there but becomes invisible.

I also find that after I open the contact list, the phone button will show the call list correctly.

Is there something wrong in the software. Please advise. Thanks!

[radhoo]

Hi dvmrp, my guess is that you are using it on a Smartphone device

Then, something similar to the system dialer comes up from nowhere but without the call list.

This is caused by the smartphone dialer, the cdial.exe, and this sometimes appears when pressing Stop in BlueMusic. You need to press the back key to make it dissapear. We might do this automatically in a future release (to simplify the user's job).

run into a issue that when I turn it off, the 'BM' screen changes to the 'off-line' logo but exists all of a sudden

So when you see this, simply press the Back key.

[dvmrp]

Thanks for your prompt reply.

Yes. c720w is a smartphone.

[UKenGB]

As you say, this is the BM 2 thread and you believe that its installer is off-topic (a debatable point IMO), so let's move on. In any case I can now expect a trouble free install as you have made the CAB files available. Thank you very much for that, it means so much for some of us:-)

[admin]

Well, thanks for the sugestion with the CAB Files, I guess this helped this to happen.

[18catz]

Hi Teksoft

I am having real problems with BM2.0 on 02 XDA Mini S (HTC Wizard) running WM5 AKU2 with a Nokia HF33 Bluetooth Speaker
I have similar issues to Steve (above)

When I activate RM I too get the 'beep' in the headset and can hear a hiss in the earpiece but no sound from the Pocket PC is directed through it - it all still comes out of the device's speaker. No amount of resets, switching on and off fix the issue

I have also hard reset the phone and clean installed BM2.0

There also seems to problem with Voice dialing. Prior to installing BM 2.0I could hold the connect key down on by Nokia Speaker for 3 secs and it would start the Voice Dial application on my phone.

After installing BM2.0 this action just beeps, hisses in the speaker for a few moments, but does not start the Voice Dial application

This has only started with BM2.0. I was able to use BM1.5 without issue
The reason I upgraded was to make use of Auto-Reconnect after a phone call.


Any Ideas Greatly Appreciated

Cheers

18catz

[Johny]

I know this doesn't help much, but I have the HTC Wizard too and for me works good.

[stevewooding]

Here's the contents of the file as requested
-----------------
[14:23:35] setting file attributes
[14:24: 4] setting file attributes
[14:24:22] setting file attributes for:[\Storage Card\Program Files\Teksoft\BlueMusic 2.0\Bluemusic.dll]
[14:24:22] install exit
[14:24:32] Install_Exit: check model name [HERM100]
[14:24:32] Apply HTC Tytn fix
[14:24:32] BTOLDDLL: SetFileAttributes res:1
[14:24:32] BTOLDDLL: DeleteFile res:0
[14:24:32] CopyFile res=0 [source:\Storage Card\Program Files\Teksoft\BlueMusic 2.0\btagext.dll]
[14:24:32] SetVoiceCommandDuration:1
[14:24:36] YES, going for reset.
[14:40: 7] setting file attributes
[14:40:13] setting file attributes for:[\Program Files\Teksoft\BlueMusic 2.0\Bluemusic.dll]
[14:40:13] install exit
[14:40:15] Install_Exit: check model name [HERM100]
[14:40:15] Apply HTC Tytn fix
[14:40:15] BTOLDDLL: SetFileAttributes res:1
[14:40:15] BTOLDDLL: DeleteFile res:0
[14:40:15] CopyFile res=0 [source:\Program Files\Teksoft\BlueMusic 2.0\btagext.dll]
[14:40:15] SetVoiceCommandDuration:1
[14:40:18] YES, going for reset.
[15: 1:14] setting file attributes
[15: 1:19] setting file attributes for:[\Program Files\Teksoft\BlueMusic 2.0\Bluemusic.dll]
[15: 1:20] install exit
[15: 1:22] Install_Exit: check model name [HERM100]
[15: 1:22] Apply HTC Tytn fix
[15: 1:22] BTOLDDLL: SetFileAttributes res:1
[15: 1:22] BTOLDDLL: DeleteFile res:0
[15: 1:22] CopyFile res=0 [source:\Program Files\Teksoft\BlueMusic 2.0\btagext.dll]
[15: 1:22] SetVoiceCommandDuration:1
[15: 1:25] YES, going for reset.
-----------------

Let me know how I can sort this out, otherwise there's no point me buying the software - if it can be guaranteed to work, I'll be a very happy customer as I'm a Cycling Instructor and use TomTom a lot to get me to schools so using it through a bluetooth headset is 1000 times better than trying to listen to my phone from my pocket over the traffic noise.

Steve

[admin]

Steve,

What happens if you press Start in Bluemusic and then you press the Headset button for a few seconds?

[miromiro]

Hi, i had a big problem ....
after inslall my copy of bluemusic 2.0, peering with Jabra205 all seems
to work.
Mediaplayer and skype ok ... but only for 10 second, after 10 second
the audio comes back from the phone speaker.
Can you help me ?

[stevewooding]

Pressing the button again after launching BM seems to do the trick for the 2 minutes demo time. Ta!

Let's hope the full version works properly!

Steve

[radhoo]

Good to hear that, Steve.

[wing]

Great product guys, just what I was looking for .

If it's not too early to ask will the next version be skinable? I think I saw somewhere that skins are about to be supported. I'm using a red today background and I'd like to change the blue-colored plugin to something else.

[rexesq]

I downloaded the trial version to see if I can get Skype to quit going through the speakerphone, and start going through the Bluetooth headset. Incidentally, I have the latest version of MS Voice Command also installed and running I installed BM from PC through ActiveSync, and installed to the mini-SD card. The install said it completed correctly, although it took quite some time for the last .CAB to finish.

Regardless, BlueMusic does not appear to route audio to the BT headset, even after going to BM Config and disabling the auto speakerphone item. Should I not have installed to the SD card? Do I need to uninstall and reinstall to main memory? How do I do that, if necessary? Bottom line, what am I doing wrong?

Also, where are the Help files? I could find no help at all for this product.

[admin]

BM contains a today plugin, I sugest you install it in the main memory.

The help can be accessed from Start->Programs->BM->Menu->Help

or online at:
http://www.teksoftco.com/index.php?sect ... c&tab=info

Also I think you shouldn't use it with MS Voice Command, try disabling it before installing BM.

[FloridaDoc]

Blue Music 2.0 is great and adds some really useful new features , but philisophically I am opposed to charging for an "upgrade" that occurs in less than month after initial purchase -- regardless of how reasonable the price. However, I digress.

Version 2.0 has the annoying habit of not working after rebooting my Cingular (HTC) 8125 after a successful installation. I receive the following error message:

The file 'BM2_Monitor.exe' cannot be opened. Either it is not signed with a trusted certificate, or one of its components cannot be found. You might need to reinstall or restore this file.

In order to regain Blue Music 2.0 functions, it must uninstalled and reinstalled -- being careful to not reboot my 8125 for some other reason.

Has anybody else had this problem? If you're a v2.0 user, do a "hard" reset, or reboot, and see if you receive this same error message.

Any suggestions would be greatly appreciated.

[admin]

Blue Music 2.0 is great and adds some really useful new features

Finally some nice words

FloridaDoc, I guess you've installed it on your SDCard.

Better put it in the Main memory: BM 2.0 has a today plugin and also a component added in your startup folder so SDCard is not a good option (this can cause the error message you've descriebed)

[FloridaDoc]

The title "Blue Music" may be limiting the marketing of this software. The reason I purchased it was for use with monaural audio books.

Cross marketing with Audio Book sites could be quite profitable.

Just a thought

[admin]

Great product guys, just what I was looking for .

If it's not too early to ask will the next version be skinable? I think I saw somewhere that skins are about to be supported. I'm using a red today background and I'd like to change the blue-colored plugin to something else.

Thanks wing,

For you and all the BlueMusic users, the skin section is available. Check the news/press section on Teksoftco.com:

http://www.teksoftco.com/index.php?section=press#070311


Mr. A.

[UKenGB]

Install issues aside (CAB files work great, thanks) I find I have problems with the operation of BMv2 on my XDA Orbit.

It's lost the ability to revert to a traditional Today plug-in look. I guess skins are supposed to be the solution, but IMO that's overkill.

Also, my request to allow us to assign the re-direct to a hard button has been provided, but only allowing us to use the right soft button. This will NEVER be used for BM as I already have it allocated to another use - I wanted to be able to assign this action to a button of my own choice. Since I assume that the current method uses some form of exe, can we simply know what this is so we can assign it to alternative buttons?

A bigger problem, however, is that the new features that made this such an attractive upgrade don't work:-

Ringtone to Headset = X yet it still rings (loud) in the headset.

After-call resume = v' (tick:-) but it never does.

Maybe the other functions don't operate either - I've not tried, but I really would like these to function as they ought. Suggestions?

[tuhin]

Dear Tek-Support,

I suppose the BlueMusic 2.0 has not been tested under different scenario because it doesn't work as expected.
For your information, I tried it under WM5 (AKU3.5) and WM6, on my Universal and BenQ P51. But same behavior from both.

Anyway, here is my personal observation:

1. Today plugin (bluemusic.dll) has a problem with the registration as a today item. It's checked under "Settings>Personal>Today" but doesn't start in most cases so that it's not visible in today page. It's visible in today only if I uncheck and check it again but disappeared again after soft-reset!

2. No button action taken place from today plugin, even cannot open the config applet.

3. I can run BlueMusic manually (BM2_Interf.exe) and audio redirects to the headset for a few seconds and back to PPC everytime I press the start button.

I hope Tek-Support should fix it soon.

[UKenGB]

Any suggestions/fixes for my problems with v2 on the Orbit?

It's been some time since I listed these. Are TekSoft reading this topic any more?

[sad_ghost]

@ tuhin
Can you give more info related to the RUU used on your devices - Operator and the information listed in the Device Information pannel under settings.
Please note that underground RUUs wich are not fully tested and aproved on devices will probably never make it to be supported.
@UKenGB
Dear sir,
your input has been added to the debug-check list. We will get back to you when we have an answer. Please note that your device o2 Orbit (HTC Artemis) still has some serious implementation issues in the RUU.

It's lost the ability to revert to a traditional Today plug-in look. I guess skins are supposed to be the solution, but IMO that's overkill.

Can you give us more feedback on this issue...we can always come up with a solution but not sure it will respond to your needs.

Also, my request to allow us to assign the re-direct to a hard button has been provided, but only allowing us to use the right soft button. This will NEVER be used for BM as I already have it allocated to another use - I wanted to be able to assign this action to a button of my own choice. Since I assume that the current method uses some form of exe, can we simply know what this is so we can assign it to alternative buttons?

BM2_interf.exe and BM2_Config.exe are the two interface based modules of the application. You can find them in the installation folder of the application.

Ringtone to Headset = X yet it still rings (loud) in the headset.

After-call resume = v' (tick:-) but it never does.

Maybe the other functions don't operate either - I've not tried, but I really would like these to function as they ought. Suggestions?

Can you please test all the features and get back with some test results.
As i said in the first place there are still issues with the Orbit RUU and i think that many will fixed with the next release from HTC for your operator - issues related to phone and bt

Cheers,
Raul

[tuhin]

Hello Support,

Currently my HTC Universal has Crossbow (WM6) installed but I tried it (before) under WM5 (AKU3.5) and current WM6 but it's same.
My P51 has WM5 (AKU3.5).

Device info:

Universal (current):
OS: 5.2.318 (Build 15341.0.0.0)
ROM: 2.00.02 WWE
Radio: 1.15.00
Protocol: 42.51.P8
ExtRom: self cook

P51:
OS: 5.1.195 (Build 14914.2.1.0)