My first time here. I had purchase key and registered blueinput but still can't get the mouse working on my x7500.
all set ups were done. mouse pairing with device BT was ok.
under blueinput control panel, STATUS shows..
Bluetooth : ON
mouse : OFF
keyboard : OFF
i click connect but only hear one beep sound and nothing happen. So i went to HKLM\Software\Teksoft\BlueInput and set the EnableDebug key to 1 then below are outputs of bi.hid.dbg and bi.tray.dbg..
(bi.hid)
2:11: 6@85.465/0.000: DLL_PROCESS_ATTACH, Device=[ATHE100] OS=[5.2], B.RC-1.5
2:11: 6@85.449/0.016: BHI_Init
2:11: 6@85.449/0.016: +hiddev_CreateDriverInstance
2:11: 6@85.449/0.016: CreateNewState
2:11: 6@85.449/0.016: new HIDDEV
2:11: 6@85.449/0.016: attempt CreateEvent:hReconnectEvent
2:11: 6@85.441/0.016: L2CAP_EstablishDeviceContext: 0 (success)
2:11: 6@85.441/0.023: try BTH_PSM_CONTROL
2:11: 6@85.441/0.023: try BTH_PSM_INTERRUPT
2:11: 6@85.441/0.023: l2ca_ioctl: res=0
2:11: 6@85.441/0.023: new HIDDEV successful
2:11: 6@85.441/0.023: success
2:11: 6@85.441/0.023: create HidReconnectThread thread
2:11: 6@85.438/0.027: -hiddev_CreateDriverInstance : ERROR_SUCCESS
2:11: 6@85.367/0.098: Started reconnect thread
2:11: 6@85.098/0.367: BHI_Open
2:11: 6@85.098/0.367: BTHHID_IOCTL_HidSetCommLink ClientID=C75478D2
2:11: 6@85.098/0.367: DRVMouseStatus(0) -> C75478D2
2:11: 6@85.098/0.367: DRVKbdStatus(0) -> C75478D2
2:11: 6@85.098/0.367: BTHHID_IOCTL_HidSetCommLink Global Dev States: M=0, K=0
2:11: 7@85.098/0.367: BHI_Close
2:11: 7@85.098/0.367: BHI_Open
2:11: 7@85.098/0.367: BTHHID_IOCTL_HidManageFilter Client=C75478D2, nOpMode=1
2:11: 7@85.098/0.367: BHI_Close
2:11:20@81.348/4.117: Stack event (L2CAP) 3
2:11:20@81.332/4.133: Stack Up
(bi.tray)
2:11: 5@85.832/0.008:
Init tray app.
--------------------------
Device: [ATHE100]
2:11: 5@85.832/0.008: Autostart: 1
2:11: 5@85.832/0.008: INIT-0: Created close event C6662FBA
2:11: 5@85.832/0.008: INIT-1: CT-0 (app main) thread: 661520FE running.
2:11: 5@85.832/0.008: LoadSettings Enable_Tray=1 Enable_Autostart=1 Enable_Mouse=1 Enable_KB=0 Speed=4 Cursor=6 KBSounds=0
2:11: 5@85.832/0.008: INIT-2: REG Settings: 1
2:11: 5@85.832/0.008: GUI::InitWindow(66658002) call.
2:11: 5@85.828/0.012: ComputeSize::Screen size: 640x480 Menu: 52
2:11: 5@85.590/0.250: GUI::InitWindowComponents page: 0
2:11: 6@85.590/0.250: INIT-3: Screen size: 640x480, DRAX(2)=4, DRAY(2)=4, MH=52
2:11: 6@85.582/0.258: INIT-4: CT-1 (power) thread: E6056FBE running.
2:11: 6@85.578/0.262: INIT-5: CT-2 (power timeout) thread: 8665884E running.
2:11: 6@85.574/0.266: INIT-6: CT-3 (msg listener) thread: C75478D2 running. Inform Driver.
2:11: 6@85.449/0.391: PowerTimeoutThread call
2:11: 6@85.441/0.398: DriverListenThread thread running.
2:11: 6@85.438/0.402: INIT-7: ActivateDevice = 1.
2:11: 6@85.324/0.516: PowerNotificationThread call
2:11: 6@85.320/0.520: PowerNotificationThread loop [1].
2:11: 7@85.098/0.742: TM_MOUSESTATUS: 0
2:11: 7@85.098/0.742: TM_KBSTATUS: 0
2:11: 7@85.098/0.742: INIT-8: Ping Driver response: [SUCCESS]
2:11: 7@85.098/0.742: INIT-9: ManageFilter(1,1,1)= 1
2:11: 7@85.098/0.742: INIT-10: Bluetooth mode: 0
2:11:20@81.332/4.508: TM_BLUETOOTH: 1
2:11:20@81.332/4.508: DoConnect: [0060d100971c][][] active=1 auth=1 encr=1 trusted=1
2:11:54@79.207/0.004:
Init tray app.
--------------------------
Device: [ATHE100]
2:11:54@79.207/0.004: Autostart: 1
2:11:54@79.207/0.004: INIT-0: Created close event 6603FFDE
2:11:54@79.207/0.004: INIT-1: CT-0 (app main) thread: 59CE8D2 running.
2:11:54@79.203/0.008: LoadSettings Enable_Tray=1 Enable_Autostart=1 Enable_Mouse=1 Enable_KB=0 Speed=4 Cursor=6 KBSounds=0
2:11:54@79.203/0.008: INIT-2: REG Settings: 1
2:11:54@79.203/0.008: GUI::InitWindow(59CECBE) call.
2:11:54@79.203/0.008: QUIT: Duplicate instance
2:11:54@79.203/0.008: GUI::Release::Destroy: 0
2:12: 1@79.340/6.500: GUI, user pressed CONNECT
2:12: 1@79.340/6.500: DoConnect: [0060d100971c][][] active=1 auth=1 encr=1 trusted=1
2:12: 2@79.340/6.500: Cursor status 0
2:12:10@79.336/6.504: GUI::InitWindowComponents page: 1
2:12:12@79.336/6.504: GUI::InitWindowComponents page: 0
2:12:13@79.336/6.504: GUI::InitWindowComponents page: 2
2:12:18@79.336/6.504: GUI, user pressed CONNECT
2:12:18@79.336/6.504: DoConnect: [0060d100971c][][] active=1 auth=1 encr=1 trusted=1
2:12:19@79.336/6.504: Cursor status 0
2:12:20@79.332/6.508: GUI, user pressed CONNECT
2:12:20@79.332/6.508: DoConnect: [0060d100971c][][] active=1 auth=1 encr=1 trusted=1
2:12:21@79.332/6.508: Cursor status 0
2:12:22@79.332/6.508: GUI, user pressed CONNECT
2:12:22@79.332/6.508: DoConnect: [0060d100971c][][] active=1 auth=1 encr=1 trusted=1
2:12:23@79.332/6.508: Cursor status 0
2:12:24@79.332/6.508: GUI, user pressed CONNECT
2:12:24@79.332/6.508: DoConnect: [0060d100971c][][] active=1 auth=1 encr=1 trusted=1
2:12:25@79.332/6.508: Cursor status 0
2:12:25@79.332/6.508: GUI, user pressed CONNECT
2:12:25@79.332/6.508: DoConnect: [0060d100971c][][] active=1 auth=1 encr=1 trusted=1
2:12:26@79.332/6.508: Cursor status 0
2:14:48@78.109/7.730: PowerNotificationThread New Status: 12010000 [on]
2:14:54@77.406/8.434: ComputeSize::Screen size: 640x480 Menu: 52
2:14:56@76.965/8.875: ComputeSize::Screen size: 640x480 Menu: 52
please help , something is wrong here >_< I cant use the key i purchased now
